| PART |
Description |
Maker |
| NCS2502 NCS2502SQT2G NCS2502DG NCS2502DR2G NCS2502 |
650 uA 110 MHz Current Feedback Op Amp with Enable Feature
600 uA 100 MHz Current Feedback Op Amp w/Disable
|
ONSEMI[ON Semiconductor]
|
| SO-512.00-300-1.33 SO-314.00-500-0.8 SO-154.80-600 |
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 511.7 MHz - 512.3 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 313.5 MHz - 314.5 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 154.2 MHz - 155.4 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 716.3 MHz - 717.3 MHz DFP-26
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 716.8 MHz - 717.8 MHz DFP-26
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 124.8 MHz - 125.2 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 514.6 MHz - 515.4 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 254.6 MHz - 254.8 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 833.3 MHz - 834.1 MHz DFP-26
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 99 MHz - 101 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 622.1 MHz - 622.9 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 299.7 MHz - 300.3 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 269.5 MHz - 270.5 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 724.55 MHz - 725.05 MHz DFP-26
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 376.59 MHz - 378.59 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 776.7 MHz - 777.3 MHz DFP-26
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 142.6 MHz - 143.4 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 716.5 MHz - 717.5 MHz DFP-26
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 929.7 MHz - 930.3 MHz DFP-26
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 774.7 MHz - 775.3 MHz DFP-26
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 445.6 MHz - 446 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 965.7 MHz - 966.3 MHz DFP-26
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 644.6 MHz - 645.4 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 661.68 MHz - 662.48 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 319.9 MHz - 320.1 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 694.6 MHz - 695.4 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 859.7 MHz - 860.3 MHz DFP-26
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 724.6 MHz - 725.4 MHz DFP-26
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 1023.7 MHz - 1024.3 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 600 MHz - 600.6 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 607.1 MHz - 607.9 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 499.6 MHz - 500.4 MHz
VOLTAGE CONTROLLED SINE SAW OSCILLATOR, 949.894 MHz - 950.594 MHz
|
Spectrum Control, Inc.
Abracon, Corp.
Cree, Inc.
Vishay Intertechnology, Inc.
LEDtronics, Inc.
Electronic Theatre Controls, Inc.
IRC Advanced Film
Pascall Electronics, Ltd.
ITT, Corp.
TE Connectivity, Ltd.
SPECTRUM CONTROL INC
|
| ASOP-10EY |
DUAL OP-AMP, 600 uV OFFSET-MAX, 0.6 MHz BAND WIDTH, PDIP14 PLASTIC, DIP-14
|
Calogic, LLC
|
| MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
Push-Pull Output Sub-Microamp Comparators
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package,
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package.
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ...
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
From old datasheet system
IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
| CM600DU-12NFH |
Dual IGBTMOD NFH-Series Module 600 Amperes/600 Volts
|
Powerex Power Semiconductors
|
| LT1207CS |
Dual 250mA/60MHz Current Feedback Amplifier DUAL OP-AMP, 15000 uV OFFSET-MAX, 60 MHz BAND WIDTH, PDSO16
|
Linear Technology, Corp.
|
| HER406G HER406 |
HIGH EFFICIENCY GLASS PASSIVATED RECTIFIER (VOLTAGE 600 Volts CURRENT 4.0 Ampere) 4 A, 600 V, SILICON, RECTIFIER DIODE, DO-201AD
|
RECTRON LTD
RECTRON[Rectron Semiconductor]
|
| ADATE318 |
600 MHz Dual Integrated DCL with PPMU, VHH Drive Capability, Level Setting DACs, and On-Chip Calibration Engine
|
Analog Devices
|
| LT1795 LT1795CFE LT1795CSW LT1795IFE LT1795ISW |
Dual 500mA/50MHz Current Feedback Line Driver Amplifier DUAL OP-AMP, 17000 uV OFFSET-MAX, 50 MHz BAND WIDTH, PDSO20
|
LINEAR TECHNOLOGY CORP
Linear Technology, Corp.
LINER[Linear Technology]
|
| EL2260C EL2260CN EL2260CS EL2460CN EL2460CS |
Dual/Quad 130 MHz Current Feedback Amplifiers
|
ELANTEC[Elantec Semiconductor]
|
| TL082BIDT TL082BIPT TL082 TL082ACD TL082AIDT TL082 |
JFET inputs, low input bias current
General purpose JFET dual operational amplifiers
DUAL OP-AMP, 7000 uV OFFSET-MAX, 4 MHz BAND WIDTH, PDIP8
|
ST Microelectronics
STMicroelectronics
|
|
